12 / 10 / 2021 | Videos

Making a simple Dining Table



After a long time, we have finally decided to make a piece of furniture for the house and it could not be any other than a dining table 4.

Our creation is relatively easy in order to help other people to make this table by themselves as well. Firstly, we made a metallic frame with square tubes of 2mm thick. The legs were created with square tubes of 70mm x 40mm while the frame which was welded to the legs, was made with square tubes of 40x40x2mm thick. The frame was painted in matte black colour. The wood used for the table is a wooden plate, which was made by various kinds of wood that were welded together. The wood used was taken by pine trees. 

Finally, after treating the wood, we painted it with water soluble, colourless varnish. Therefore, the 0125 project ended giving us a simple but fine outcome.

Get access to the downloadable Plans for our projects
















 
...
Read More
01 / 10 / 2021 | Videos

Angle Grinder Hack 8



After so long we are returning back in making angle grinder hacks with the difference now that we are turning the angle wheel into a useful multi-tool. Using an easily adjustable construction, our angle grinder turns into a multi-tool. It is an affordable solution as buying a multi-tool is quite expensive. 

The benefits that we get modifying it is that we are able to cut precisely the shapes of the materials which are in various angles on a wood, metal, plasterboard for placing the plugs, switches and many other things. Another advantage is that with this tool we can cut and rub objects something which was not applicable to be done by the angle grinder.

Therefore, choosing to use multiple accessories that are located on the multi-tool, the angle grinder is turned into an exceptional sander that is able to rub places with angles which would not be easily accessible to common sanders. Making a cam we transform the rotating motion of the angle grinder into a reciprocating motion copying the motion of the factory’s multi-tool. Regulating the speed of the angle grinder, we can control the regressions per minute from 6000-22000 increasing the performance and the usability of the tool.

Beside the usefulness of this creation, we got an extra benefit from the various knowledge we have gained during making it and the pleasure we got creating it. In this way, we completed our creation with the number 0124, which is ready to function and the outcomes are amazing.

Get access to the downloadable Plans for our projects

















...
Read More