27 / 05 / 2022 | Videos

Making a Fast Coupling Engine

This structure is very special as it comes to give a solution to many people who are occupied doing a similar job to us. This time we chose a motorcycle engine and we placed it on a frame in order to be able to remove it and place it on many other vehicles that we are planning to make in the future without applying any transformations then. The reason which led us making this kind of structure is that every time we made a motor vehicle project we had to buy the motor. Due to this constant purchase, we had to spend a lot of money either buying it or repairing a cheaper one as well as spending time not finding the proper motor regarding its power in order to make it the right one for each past project and future ones.

First of all, we have chosen a motor of the KTM-640-LC4 which has a lot of durability, enough propensity and enough horsepower in order to meet our needs and cover the most of our structures. Also, we made a frame taken by class b 22mm tubes. Additionally, on the frame we put the motor and we adopted every element that is needed to be able to function properly. Next, we put radiator, catch tank, radiator tank, oil cooler, battery and many other elements. Most of these are made by our team. Therefore, when the engine is connected to any motor vehicle, only the connection with the clutch as well as the connection of the wire for the throttle, the connection of the fuel and the gears will be required. All these connections will not take more than five minutes as the gears are connected just with a plug of three cables and are chosen with the use of two buttons.

In conclusion, that was the structure with the number 00115 by the make it extreme team and it is a gear selector. This engine aims to be connected on any vehicle with special safety pins. We called our structure ‘the youtubers engine’ as it is very essential and suitable for people who also do what we do. Only in specific purposes, when a structure requires a particular type of engine we will have to use another motor. All in all, we are glad that we managed to implement another idea that we have had in mind for so many years. We, also, hope in the future to have the opportunity to use it many times as well as be able to improve it and take our idea a step further.

Check out our Tools ans Plans Here

Read More